Australian Manufactured Conveyor Rollers, Pulleys, Frames and Equipment

Manufacturers of Conveyor Pulleys and Equipment

Australian Manfactured and Owned since 1968
Australian Conveyor Frames
Conveyor Frames

Trough Impact Inline

Trough Impact Inline

Conveyor Frames
Impact Trough Set Inline used for heavy dynamic load applications and support for drop loading product.

A Trough Impact (Inline) assembly is used on a conveyor system where a uniform impact trough shape is required in the belt-form on the load side of the conveyor system.

The inline configuration of the rollers on the frame allows for a multi-direction operation of the belt on the conveyor system. The overall width of the trough frame can be constructed in a range of roller angles to suit all belt widths and the corresponding frame mounting bolt hole centres required to match a customer's existing conveyor structure. The roller configuration on the frame can be supplied as an option in either steel or rubber disc impact and matched as a triple set in their overall length to suit the frame back to back roller mounting features.

The rollers if required as a complete assembly can be supplied from a range of industry standard diameters, with the centre roller positioned on the frame to suit the customer's conveyor belt roll back height requirement.

The impact frames can also be supplied with 3 types of additional structural shock bracing if required. This bracing can be included if requested:

  1. between the centre and inner wing roller mounting brackets
  2. angled strut bracing between the outer wing roller brackets and the base mounting angle
  3. flat bar bracing located under the mounting angle for the width of the frame.

Trough frames can be supplied in either a painted or hot dipped galvanised finish.